• Simple: Patent-pending spring and hook design.
  • Durable: 100% Stainless Steel product. NO pulleys, plastic, cables, clips, gripper bars, or pockets.
  • Easy: System installs easily. Post single sheet posters in 10 minutes or less!
  • Efficient: Use single sheet PE posters and vinyl from any vendor!
  • Fast: Posters go straight from shipping box to billboards. No prep required!
  • Ultra Eco-Friendly: Limited cuts and protrusions allow for easy poster re-use and rotation.
  • Proven: Developed and used by billposters in extreme Great Lakes weather conditions.
  • Picture Perfect: Hidden springs hold poster close to face. No wind ripple, sags or wrinkles.
  • Cost Effective: The least expensive system to purchase, operate and maintain.

YES. PosterSpring is designed to work easily with all molding types, both new and old, 30-sheet and 8-sheet. The narrow width enables a fit even below "stretch face" trim. PosterSpring even works nicely on radius corner or "retro" panels. PosterSpring and BannerSpring provide outstanding postings on bulletins and billboard poster panels that have no molding.

Very easy, no need to remove or replace trim, molding, or brackets. Lind Outdoor converted 90% of its poster plant without removing molding. A billposter with a cordless drill, tape measure and 48 PosterSprings is all that is required.

PosterSpring is the most eco-friendly system on the market. PosterSpring is the only system that enables easy rotation and re-use of SSPs. "One and done" does not have to apply when using the system.

Yes. Made in Ohio, entirely of durable engineered stainless steel, each PosterSpring holds between 4 and 18 lbs of constant tension, as an independent member of an overall system of springs. PosterSpring contains no plastic components whatsoever. Each piece is easily replaceable simply by changing an individual spring.

Just drill small holes into the side of the molding at specified 18" intervals. Can we still post glued posters and install premier vinyl wraps after installing PosterSpring? Absolutely, PosterSpring is installed completely beneath the molding and does not protrude into the posting surface and display area when not in use. Further, vinyl wraps can be accomplished just as before as PosterSpring is completely contained beneath the molding.

Lind Media orders and uses posters from most vendors each of whom has its own designated systems. The beauty of PosterSpring system is that it works with every single sheet poster on the market, PE, vinyl, ecoflex, mesh, backlit, and more.

All vendors that provide printing for regional and national outdoor campaign posters perform extremely well with PosterSpring.

None. Drop shipped posters for local and national buys go directly from the shipping box to the poster panel with absolutely no prep time. No gripper bars, cables or clips required.

Yes. The typical Single Sheet Poster can rotate multiple times depending on the vendor. PosterSpring requires limited protrusions into the poster while holding the SSP extremely close and tight to the face resulting in maximum poster life span. Lind Outdoor rotates hundreds of SSPs monthly with great success.

PosterSpring has provided amazing success on the sales side of our business because our poster and bulletin plants look awesome. Tight, wrinkle free postings equal happy advertisers. The ability to re-use and rotate single sheet posters has lowered production costs for our advertisers, enabling them to increase ad-spend in outdoor space. PosterSpring delivers lower production costs which provide a competitive advantage versus other outdoor operators and other media formats in general.

PosterSpring has enabled Lind Outdoor to increase billposting ability by 60%, while enabling increased efficiency overall. We have been able to transfer personnel to construction, maintenance and vegetation control that has enabled us to elevate the quality, size, and condition of our plant.

PosterSpring can be incorporated into any billboard operation with existing trim, available in 3", 6" and 11" lengths to fit any billboard molding. Once installed, no tools are needed for posting. We are not aware of a better billboard posting system.

Installation directions for the Lind PosterSpring

Specs of a Single Sheet Billboard Installation System

Coming Soon!